BOOT FOR CYLINDER 6.8L
R470.00
Cylinder Boot – Upper and Lower Carbon cylinder boots.
Fits the 6.8l Carbon composite cylinder for protection.
Colour : Black
Stop your bottle falling over – This rubber boot simply pushes on to the the bottom of your cylinder and gives a flat base to help prevent the bottle from falling over.
Protect the base of your cylinders – The flat bottoms allow the cylinders to stand upright and are vented with ribs and drain holes to allow water to drain away to help prevent corrosion.
Designed fit perfectly over the bottom of your steel diving cylinder, providing superb impact protection and improved stability.
Made from a high quality rubber compound.
Related products
-
HUMA EXTERNALLY ADJUSTABLE INLINE PCP REGULATOR WITH INTEGRATED FILLSET
R4,600.00Read moreNote: No returns will be accepted on this item
This ultra compact external regulator is specially designed for airgun shooting is can be screwed on to a 200/300 bar scuba tank with DIN connection.
The regulator will reduce the outgoing pressure according to your settings so you can optimize the working pressure matching your air rifle. This will result in a constant pellet speed and better groups. The regulator is equipped with a pressure gauge what will indicate the set pressure and a bleed screw so it can fully function as a fill set.
The outgoing pressure range can be step less set from the outside, within the pressure ranges below, by turning the bronze ring.
1: 70-125 bar
2: 100-200 bar
3: 180-250 bar
Within these settings the regulator can be set stepless in pressure. The standard setting is “2” in the pressure output range 100-200 bar.
Because of the de-pressurize screw and manometer the regulator can also be used as a stand alone fillset. You will need a fill hose with 300 bar DIN connection to attach to the regulator (not included)
If you already have a fillset with 300 bar din connection it can be screwed into the regulator. -
1/8″ M SERIES MALE NIPPLE
R60.00Add to basketThe BST-1M nipple is used in conjunction with the micro coupler to fill high pressure PCP’s –
1/8″ M Series Male Nipple.
-
-
BST-1 MICRO QUICK COUPLER FOR PCP/PAINTBALL 1/8” FEMALE
R92.00Add to basketBST-! Micro Quick Coupler for PCP/Paintball 1/8″ Female – for high pressure application rated at 500bar
Fills paintball guns and fits the Airforce (New and older models),Discovery,Benjamin Marauder pistol and rifle,Predator & Jackal for filling purposes.
