FX SLUG POWER KIT
R1,700.00
The FX Airguns Impact Slug Power Kit – Silver provides existing Impact owners with the ability to upgrade the power of their air rifle. This is particularly useful for shooting airgun slugs and other heavy projectiles. This simple kit brings some key modifications to the rifle to maximize the power and accuracy potential of the Impact, especially when using slugs. Increased velocity is achieved in large part to the addition of two hammer weight spacers. These are placed in front of the return spring on the hammer weight guide. This allows for more compression on the hammer spring as well as adding more weight to the overall hammer.
Combined with the hammer weight spacers is a replacement valve return spring. This is slightly lighter than the original spring, thus allowing the valve to stay open longer when the gun is fired. This allows more air through the valve for each shot, the better to propel heavier projectiles like airgun slugs. Also included in this Slug Power Kit is a cleverly designed pin probe.
This adjustable pin probe allows for adjustable seating depth, dependent on your projectile. FX Airguns says that this aids in accuracy. The improvement is attributed to improved seating of the projectile into the barrel. The pin probe also increases the air flow in the barrel due to its slimmer design. The kit comes with a .22 calibre pin probe. An additional sleeve slides over it to create a .25 calibre pin probe.
Sold Out
Get notified when this product is back in stock.
Related products
-
ALTAROS CZ200 QUICK FILL WITH GAUGE AND FILL PROBE
R2,000.00Add to basketQuick Fill for Airgun is a tool that enables you to fill the air tube of the gun without removing it from the gun. This quick fill has both gauge and filling probe as well as spare seals.
-
-
LOTHAR WALTHER BLANK – POLYGON, CHOKE, 5.5MM L605MM
R3,120.00Add to basketLOTHAR WALTHER BLANK – CHOKE, 5.5MM L605MM, OD 16MM 450 TWIST, 12 GROOVES
Lothar Walther barrel blanks are supplied in a multitude of variations and are produced from special barrel steel. On one end there is a chamfer, this side must be fitted into the rifle. All blanks will need to be machined specifically for your rifle.
