HUMA AIR GEN 3 TUNING REGULATOR FX IMPACT M3 / M4
R2,400.00
(1155) Gen 3 FX Impact & FX Crown Huma Tuning Regulator (100-165 BAR)
Huma-Air tuning regulator Gen 3 for the FX impact & FX Crown air rifle as a replacement for the factory regulator with a 16 mm piston and 10 mm Belleville springs.
The benefits of the Huma-Air, FX Impact and FX Crown Gen 3 tuning regulator are:
- The recovery time in between shots is much faster compared to the factory regulator.
- This Huma-Air FX impact or Crown regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
- Equal to the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve gets damaged.
- By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
**NO RETURNS ACCEPTED**
Related products
-
LOTHAR WALTHER BLANK – POLYGON, CHOKE, 6.35MM L605MM
R3,388.00Add to basketLOTHAR WALTHER BLANK – POLYGON, CHOKE, 6.35MM L605MM, OD 16MM 450 TWIST, 6 GROOVES
Lothar Walther barrel blanks are supplied in a multitude of variations and are produced from special barrel steel. On one end there is a chamfer, this side must be fitted into the rifle. All blanks will need to be machined specifically for your rifle.
-
REPLACEMENT PISTON SPRING FOR HW30
R268.00Add to basketWEIHRAUCH mainspring 7.5 Joule of power (F) for HW30
-
Length: 170mm
-
Number of coils: 23
-
External Diameter: 18mm
-
Internal Diameter: 12mm
-
-
-
1/8 BSP DOWTY WASHER
R10.00Add to basketBonded seal washer or Dowty washers are used as an airtight high pressure seal between two threads.
