CO2 / UNIVERSAL FILL ADAPTER WITH FOSTER FITTING AND GAUGE
R415.00
Ninja Universal Fill Adaptor Made in the U.S.A. For use with CO2 fill stations and remote coils. This is a dual port design (Allows for two remote lines to be connected to the adapter).2 Port (run two remote lines off your adapter)
Made in the USA
Related products
-
COMPLETE **YOKE-TYPE** PCP FILL STATION
R850.00Add to basketCOMPLETE **YOKE-TYPE** PCP FILL STATION.
-
HUMA EXTERNALLY ADJUSTABLE INLINE PCP REGULATOR WITH INTEGRATED FILLSET
R4,600.00Read moreNote: No returns will be accepted on this item
This ultra compact external regulator is specially designed for airgun shooting is can be screwed on to a 200/300 bar scuba tank with DIN connection.
The regulator will reduce the outgoing pressure according to your settings so you can optimize the working pressure matching your air rifle. This will result in a constant pellet speed and better groups. The regulator is equipped with a pressure gauge what will indicate the set pressure and a bleed screw so it can fully function as a fill set.
The outgoing pressure range can be step less set from the outside, within the pressure ranges below, by turning the bronze ring.
1: 70-125 bar
2: 100-200 bar
3: 180-250 bar
Within these settings the regulator can be set stepless in pressure. The standard setting is “2” in the pressure output range 100-200 bar.
Because of the de-pressurize screw and manometer the regulator can also be used as a stand alone fillset. You will need a fill hose with 300 bar DIN connection to attach to the regulator (not included)
If you already have a fillset with 300 bar din connection it can be screwed into the regulator. -
INLINE ADJUSTABLE REGULATOR WITH FITTINGS – COMPLETE
R1,780.00Add to basketSHOOT DIRECTLY OUT OF YOUR CYLINDER !!
INCLUDES ADAPTER FOR YOUR FILL STATION, AN ADJUSTABLE REGULATOR AND ADAPTER FOR YOUR CYLINDER.
-
HUMA-AIR EXTERNAL TUNING REGULATOR FOR CZ200
R2,620.00Read moreHuma-Air External Tuning Regulator For The CZ 200. The Huma regulator will regulate the air pressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a lower pre-set working pressure. This will give you a constant pellet speed and a higher accuracy; no more compensation on the HFT lane!
Note: No returns will be excepted on this item as it is factory set and tampering will void the warranty
-
