FX HIGH FLOW DUAL HOLE TRANSFER PORT FOR PANTHERA, DYNAMIC & KING AIR RIFLES

High Flow Dual Hole Transfer Port For FX Panthera, Dynamic, King By Huma-Air

We have managed to optimize and even enlarge the air passage in this High Flow Dual Hole Transfer port. The V-shaped transfer opening makes sure you will have the maximum and smoothest air passage area. The middle support bridge divides the transfer port into a dual hole port. This middle bridge makes sure the pellet or slug nose cannot fall into the enlarged transfer port hole, but will be guided smoothly by the middle bridge into the barrel.

This dual hole transfer port has much larger air passage area compared to the oem port for maximum performance.  The increase surface varies by caliber; specially for the smaller calibers like .177, .22 and .25 calibers the enlargement and flow optimization is substantial.
For the .30 calibers there enlargement is negligible as there is not enough material to remove for enlargement. We have the .30 model as replacement or to be used in the caliber exchange kit

In combination with our High Flow Slug- and Pellet Probe you will be able to get even more power out of your FX Panthera, FX Dynamic or FX King.

This part can replace the FX item numbers: 20928, 20929, 20930, 20931

IMPORTANT NOTES:

FX uses a medium strength treadlocker to fixate the transferport to the barrel to prevent the barrel coming loose. We strongly advice you to use a tread locking adhesive like Loctite® 2400 also

Please check the FX Factory Exploded View before dismantling the rifle

The barrel system runs thru a pressurized tube and the locking screw holds the barrel system, faulty dismantling or faulty re-assembly can cause serious injury to yourself and other living beings in the proximity.