LOTHAR WALTHER BLANK – POLYGON, CHOKE, 4.5MM L605MM
R3,120.00
LOTHAR WALTHER BLANK – POLYGON, CHOKE, 4.5MM L605MM, OD 16MM 450 TWIST 6 GROOVES
Lothar Walther barrel blanks are supplied in a multitude of variations and are produced from special barrel steel. On one end there is a chamfer, this side must be fitted into the rifle. All blanks will need to be machined specifically for your rifle.
Related products
-
ALTAROS 0.15L CZ200 AIRTUBE WITH BUILT-IN REGULATOR AND QUICK-FILL WITH GAUGE, FILL PROBE INCLUDED
R6,500.00Add to basketAltaros 0.15L CZ200 airtube with built-in regulator and quick-fill with gauge, fill probe included
PLUG and PLAY!!!
Thanks to the use of strength duralumin material, the Altaros airtube is almost 3 times lower in weight when compared to the original airtube, which is especially useful for shooters who are trying to lighten the front of the gun. Thanks also to the use of duralumin (an aluminum alloy) and black anodized surface treatment there is no risk of internal or external corrosion like with the steel original airtube.
The regulator used in the Altaros CZ200 duralium airtube is vented (venting hole which is connected with atmosphere). Installation is the same as all other vented regulators.
-
HUMA-AIR COMPLETE O-RING KIT BENJAMIN MARAUDER
R260.00Add to basketA complete set of replacement o-rings for your Benjamin Marauder
With this set of o-rings you will be able to replace all the o-rings of your rifle.
These sets are suitable for all models and calibers (extra caliber specific o-rings are included)(The picture shows a generic set of o-rings. The amount and sizes of the o-rings will vary per model and type)
-
EXTERNAL REGULATOR FOR AIRGUNS
R568.00Add to basketThis compact regulator is designed for airgun shooting and can be attached in-line by use of extra fittings (SOLD SEPARATELY).
-
HUMA-AIR QUICKFILL FOR AIR ARMS S200 (SKU: 1116, 1179)
R2,050.00Add to basketA popular addition for the Air Arms S200 that allows you to check the pressure in the main pressure reservoir. They are easy to fit yourself, you simply remove your old quickfill or gauge, then screw the new quickfill with pressure gauge into your air cylinder. It replaces the quick fill on your rifle so that you have quick fill and a pressure gauge combined.
The gauge body is made of anodized aluminum in a matte black color what suits the S200 very well. It has a rotating dust cover over the fill port to keep dirt out, which also protects the pressure gauge when you are using the rifle. There are no parts to remove when filling, simply twist the cover, insert the fillprobe and fill the rifle. A stainless steel, quick-fill fill probe can be chosen optionally or you can also use a standard BSA fill probe.
The pressure gauge is sealed with an o-ring under the treads. This o-ring makes it possible to align the gauge perfectly so it will always looks great. There is an extra o-ring supplied what could be used if the alignment with the standard ring is not perfectly.
Just remove the thick standard ring underneath the gauge and replace it for the slightly thinner version.
The pressure indicator is rated to 250 bar, but you should never exceed the factory advised fill pressure of you rifle.
The total length of the quick fill is approximately 36.5 mm measured from the end of the pressure tube. Because there are many different lengths of cylinders and barrels, it is advisable to check whether this does not disturb the placement of a silencer.No fitting instructions are sent out with the gauges.
*NO RETURNS ACCEPTED**
