REPLACEMENT GAUGE FOR PCP1000 WITH SEAL
R480.00
Replacement gauge and seal to fit the Nova Vista PCP1000 PCP air rifle.
Related products
-
-
HUMA AIR GEN 3 TUNING REGULATOR FX IMPACT M3 / M4
R2,400.00Add to basket(1155) Gen 3 FX Impact & FX Crown Huma Tuning Regulator (100-165 BAR)
Huma-Air tuning regulator Gen 3 for the FX impact & FX Crown air rifle as a replacement for the factory regulator with a 16 mm piston and 10 mm Belleville springs.
The benefits of the Huma-Air, FX Impact and FX Crown Gen 3 tuning regulator are:
- The recovery time in between shots is much faster compared to the factory regulator.
- This Huma-Air FX impact or Crown regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
- Equal to the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve gets damaged.
- By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
**NO RETURNS ACCEPTED**
-
-
HUMA AIR DIGITAL MINI PRESSURE GAUGE FOR FX IMPACT 28MM
R1,100.00Add to basketThis electronic mini pressure gauge with a diameter of 28 mm is a great upgrade for your rifle and can be used on for example your FX Impact or Edgun.
It has the same diameter as the currently used big pressure gauges on the Impact MKII (28 mm diameter) and with the black cover included it is 32 mm in diameter. The height of the gauge is 24 mm. (excl treads)
With the just one button operation mode you can switch the gauge on and it will display the pressure in bar for about 30 seconds before going into the sleep mode again.
A large opening in the housing makes it very easy to change the battery and due to the cover it is fully out of sight.Suitable for 300 bar working pressure. It has a G1/8bsp treaded bottom connection, which makes it suitable for several other brands too. An o-ring is included for proper sealing on most air-guns.
